The CS PLUS A cap sealing system is designed for hand held cap sealing in lower production applications
The machine is portable and able to be used in multiple locations.
The solid state circuitry and built-in timer provide high control of the sealing process.
Stainless steel construction makes maintenance and cleaning easy
Up to 30 caps/minute may be sealed.
Foot pedal and trigger operation are included
Up to 5 programs can be set by the customer and stored in memory.
A multilingual user interface is included.
End-of-cycle and Fault audible signals are provided.
The timer control is incremented 0-9.9 sec. in 0.1 sec increments, and 10-30 sec in 1 sec increments.
The 2 x 16 LCD display shows power setting, time, status and alarm messages.
No load (Missing Foil) detection circuit is included.
No tools are required for adjustment or set-up. It requires no maintenance and it is air cooled, requiring no water for cooling.
It is silent and has no discharge.
OPTIONAL EQUIPMENT:
Hand-Held Coil Stand: Eliminates the need to hold the sealing head. Elaborate mechanical design allowing easy centering and accurate positioning of the container below the sealing head. Insures repeatability of the sealing
Electrics Required: Universal Input line voltage: 95 – 255 V AC, 50/60 Hz
Power Ratings (continuous operation): 1kW at 110V AC, 1.2kW at 220 V AC. (Forced air cooling). Line regulation of the output current: 1.5 % (95 –240V AC). Load regulation of the output current: 2 % (No load to Full load). Frequency Range: 60 – 150 kHz.
Output: Series tuned, current-regulated output circuit. Built-in thermal protection with automatic fan control. Over current protection and cycle-by-cycle current limiting and “Soft start” inrush current control.
Dimensions: 7" x 9.5"x 12" (18 cm x 24 cm x 30 cm)
Shipping Weight: 12 lb (5.5 kg)
Other Features
DC Volts monitoring and protection circuit.
Power monitoring and automatic power limiting capability.
Microprocessor controlled Frequency sweeping and PLL phase adjustment.
Minimal circuit tuning and adjustment is needed.
Automatic coil recognition – “Plug and Play” operation.
Built-in thermal protection of the coil
“Heat On” light - 360º visible angle
75% Duty cycle at 100% power. 100% duty cycle at 75% power
Digital Microprocessor-based control
Ready/Heat On/Fault Status lights
INDUCTION SEALING MACHINES INDUCTION SEALING PROCESS CAP TIGHTENERS HOME REQUEST INFORMATION